Updated November 2026. The Prism Hardscapes Tavola 110 is the longest standard fire table Prism makes — a 110-inch rectangular GFRC concrete piece cast and hand-finished at their Chino, California shop. It covers the same square-footage bracket as The Outdoor Plus Alberta 120 and sits above every other dining-height fire table in our catalog. The buyer is a builder or homeowner finishing a long banquette patio, hospitality install, or luxury residential great-room — somebody who needs the geometry of a full dinner-table-length fire feature without stepping into fully custom fab. Build budget typically runs $14K-$22K installed depending on finish, burner, and gas line work.
Who the Tavola 110 is actually for
Three buyers show up for the Tavola 110. The first is a landscape architect finishing a resort, boutique hotel, or restaurant patio — the proportions read as architectural rather than as patio furniture, which is why hospitality specs this piece over slab-concrete alternatives. The second is a residential builder working on a 25-foot-plus patio with a long cushioned banquette; the 110-inch length matches the seat run instead of leaving a stub of empty concrete at one end. The third is a homeowner who has already outgrown a smaller round table and wants one piece that can anchor a dinner-sized gathering of ten or twelve people without clustering.
Who it’s not for: anybody shopping on price, anybody with a patio under 20 feet in the long dimension, and anybody who hasn’t confirmed their gas service can deliver the BTU load this piece runs on. If you’re in any of those buckets, the smaller Tavola models — Tavola 1 through 5, Tavola 42 — cover the same material and finish quality at a scale your patio and gas service can actually accommodate.
Prism’s entire catalog, including the Tavola 110, is cast in glass-fiber reinforced concrete — GFRC. GFRC is the material the industry uses for building facades, architectural panels, and highway sound walls; it’s engineered to outperform plain cast concrete in three ways that matter for an outdoor fire feature: it’s roughly a third the weight at the same wall thickness, it carries far more tensile load (so thin profiles don’t need steel rebar running through them), and it holds up through freeze-thaw cycles that cause plain cast concrete to spall within three winters. See ourGFRC vs. standard concrete fire tablesbreakdown for the full material comparison.
“A fire table that spalls in year three isn’t a fire table — it’s a repair job waiting to happen. GFRC is what separates a ten-year piece from a three-year piece in a freeze-thaw climate.”
Size positioning: the longest standard fire table in our catalog
At 110 inches long by roughly 32 inches wide and 18 inches tall, the Tavola 110 occupies the rare bracket of “dinner-length fire table” that most makers only produce in custom. Prism’s next-size-down is theTavola 42(42 inches square — a single-group table), with the Tavola 1 through 5 models filling the mid-size bracket. The 110 is the only standard Prism piece designed to anchor a full banquette or a 10-plus person gathering without needing a two-table layout. TheTavola 1— their mid-range at roughly 60 inches — is the size most residential patios actually fit; the 110 is the escalation when geometry requires more length.
BTU output and burner options
The Tavola 110 ships with a 316-grade stainless linear burner sized to the long axis of the table — typically a 60-inch or 72-inch burner depending on configuration. BTU output lands in the 150,000 to 200,000 range depending on burner length and fuel (natural gas vs. propane runs slightly lower on NG). This is well above the 60,000-110,000 range most residential fire tables deliver, and it’s the reason the flame visual reads across a 25-foot patio instead of disappearing after five feet. The burner pan is powder-coated steel; the ignition is match-lit standard, with electronic ignition (EI) as a factory upgrade through Prism’s build-to-order program.
Tavola 110 vs Tavola 42 vs Tavola 1 — side-by-side
Spec
Tavola 110 (flagship)
Tavola 1 (mid)
Tavola 42 (compact)
Shape
Rectangular
Rectangular
Square
Length × width
110" × ~32"
~60" × ~24"
42" × 42"
Height
~18"
18"
18"
Burner style
60-72" linear
Linear
24" bullet or lotus
BTU output (NG/LP)
150K-200K
90K-120K
55K-85K
Weight (approx)
~800+ lb
~400 lb
~250 lb
Material
GFRC concrete
GFRC concrete
GFRC concrete
Best fit
Banquette / 10+ guests
Mid-size patio, 4-6 guests
Single group, 2-4 guests
Prism builds to order; final dimensions, burner choice, BTU, and weight are confirmed at the quote stage. Confirm current pricing and lead time on each product page.
Installation: the two places this project gets underspec’d
A Tavola 110 install isn’t fundamentally hard — it’s a heavy table, a slab, and a gas line — but two spots consistently trip up projects that otherwise plan well. Walking a contractor through these before the slab goes down avoids the most expensive rework calls in this segment.
Pro tip — gas line sizing. A 150,000-200,000 BTU appliance needs a 3/4-inch gas line minimum from the meter, not the 1/2-inch line that feeds a grill. Running the Tavola 110 off an undersized line causes flame-height loss within the first thirty seconds of use — the line starves — and most homeowners read that as a product defect rather than a plumbing issue. For runs longer than 50 feet from meter to table, step up to 1-inch line to keep static pressure. If the project involves a grill, a side burner, and the fire table off the same trunk line, size the trunk for the sum of the loads. See our fire pit BTU guide for the full BTU / line-size table.
Watch out for — slab prep and drainage. The Tavola 110 lands around 800 pounds without burner media. That’s load any properly-poured 4-inch concrete slab handles, but it’s not load that a paver patio with a sand base will tolerate over a decade — the table settles, the slope creeps, and the burner pan ends up out of level. Pour a dedicated 6-inch slab under the footprint if the patio surround is pavers, and leave a quarter-inch gap on each side for drainage. Perimeter drainage matters more than people realize on a 110-inch footprint: water that pools against the GFRC base won’t damage the concrete, but it accelerates burner-pan corrosion from the underside. See the fire pit sizing guide for the clearance envelope around a piece this size.
Finish and burner customization
Prism offers the Tavola 110 in their signature finish palette — Pewter, Bone, Smoke, Café, Charcoal, Rust (Corten-look), Chestnut, and Natural — plus the ability to spec a custom patina through their build-to-order program. The finishes are applied by hand after casting; two tables in the same color will have subtle variation, which is the point. The surface does not require sealing. Pewter and Smoke tend to read most “concrete,” Chestnut and Bone read warmer against stone or wood decking, and Rust is the finish landscape architects pick when the surround already includes Corten elements like planters or screens.
On burner shapes, the Tavola 110 is a linear-burner table by design — the geometry calls for a 60- to 72-inch straight burner down the center. Prism’s other series (Moderno round, Dune curved, Piazza square) accommodate Bullet, Lotus, Pentagon, and Psilos burner styles for buyers who want a sculptural flame pattern. If that’s the intent for the 110 specifically, that goes through the custom program rather than the stock SKU.
How it compares
vs. The Outdoor Plus Grand (Alberta 120, Coronado 84)
At the 100-plus-inch tier, Prism’s main competitor isThe Outdoor Plus. The Alberta 120 is 10 inches longer than the Tavola 110 and the Coronado 84 is 26 inches shorter — different geometry choices at adjacent sizes. TOP builds in GFRC, Corten steel, hammered copper, and powder-coated aluminum; Prism builds everything in GFRC. If the project calls for a copper or Corten finish, TOP wins by material availability. If the project is a GFRC-concrete composition, Prism’s hand-finishing shows at close range in a way the TOP concrete pieces don’t quite match. TheOutdoor Plus vs. Prism Hardscapes head-to-headcovers this in more depth.
vs. Elementi Granville and other GFRC competitors
Elementi makes well-engineered GFRC pieces at a lower price bracket than Prism, with the Granville being their closest geometry match — a large rectangular table in the 78- to 96-inch range depending on model. Elementi ships from a larger-volume factory with tighter cost per piece; what you give up is the hand-finish variation and the full custom-color program. A Tavola 110 at full custom runs roughly 2× the street price of an equivalent Granville. For hospitality and high-end residential where the piece is visible at close range and the budget is already in six figures, Prism’s hand-finish earns the premium. For volume builds or spec projects where the piece reads at distance, Elementi is the pragmatic answer.
vs. smaller Prism pieces (Moderno, Dune, Piazza)
If the geometry of the space doesn’t actually need 110 inches of fire table, dropping down a tier gets you the same material and finish quality for a materially lower budget. TheModerno 3covers mid-size round, thePiazza 39covers mid-size square, and theDune 42is a signature organic-shape piece at a scale most patios accommodate. The 110 is the escalation when the project geometry specifically demands length.
Where the Tavola 110 falls short
Build-to-order lead time is 3-5 weeks in standard finishes and runs longer for custom patinas. The 110-inch piece ships freight only and requires lift-gate truck plus either a strong crew or a pallet jack to position — this isn’t a UPS-ground drop. Replacement burner parts for the 60- to 72-inch linear burner are available through Prism directly, but they’re not a stock item at every outdoor retailer, so plan your service relationship up front. Finally, the GFRC surface will darken from heat staining directly above the burner over years of use; this is characteristic and most buyers consider it patina, but if you expect a brand-new concrete look five years in, this is a piece you’ll be disappointed in.
Where to see it, buy it, or ask questions
TheTavola 110 product pagehas current pricing, available finishes, and the specification sheet for download. For questions on fit, gas line sizing, or burner configuration, the dealer team can spec the build with you before order — this is the right kind of piece to do a 15-minute pre-order call on, not a single-click checkout. Browse the rest of the lineup at thePrism Hardscapes brand hubor in ourgas fire pits collection.
Editorial disclosure: FirePits.com is an authorized dealer for Prism Hardscapes and earns revenue when readers purchase through this page. All editorial judgments — including the “who should not buy this” and “where it falls short” sections — are independent of that relationship. Prism did not review, pre-approve, or compensate for this article.
Ash — Ash writes the buying guides at FirePits.com — years of specifying fire features on residential installs, from urban patios to mountain properties.